Safe e-bike charging. 4h auto-shutoff.
Reduce fire risk with timed e-bike and e-scooter charging for bike rooms. One button. No app. No WiFi. No monthly fees.
What Is the Bikeep Smart Socket?
The Bikeep Smart Socket is a controlled power outlet designed for e-bike and e-scooter charging in shared parking facilities such as apartment bike rooms, corporate campuses, and transit hubs. Each socket operates independently with a push-button activation and an automatic timer shutoff, configurable to 1-hour, 2-hour, 4-hour, or 8-hour durations, to prevent unattended overnight charging and reduce fire risk. The system requires no WiFi, no mobile app, and no subscription — connectivity is handled over 4G where remote management is needed. Its modular design allows 1 to 4 modules to be combined, providing 3 to 12 sockets per installation, and wall mounting takes approximately 30 minutes with standard fixings and no electrician. The Smart Socket is the newest addition to Bikeep's product line of IoT-enabled bicycle and scooter infrastructure.
How Does the Smart Socket Work?
Plug in your charger. Press the button. Green LED turns on. Socket powers the charger for 4 hours, then shuts off automatically. No overcharging. No unattended overnight loads. Reduced fire risk.
Plug In
Plug in your e-bike or e-scooter charger
Press Button
One push. That's it. Socket powers on instantly.
Green LED
Green light confirms charging. Timer starts automatically.
Auto-Shutoff
Socket cuts power after 4 hours. Every time, no exceptions.
The Problem
Property managers disconnect wall outlets in bike rooms because there's no way to control charging time or energy use. Residents are left with two bad options — charge in their apartment or don't charge at all. One is a fire hazard. The other kills e-bike adoption. Meanwhile, fire codes are tightening.
Without Controlled Charging
- Property managers disconnect wall outlets
- Residents forced to charge in apartments
- Or don't charge at all — kills adoption
- No way to control charging time
- Uncontrolled overnight charging risk
- Fire codes getting stricter
With Bikeep Smart Socket
- Safe charging in designated bike rooms
- 4h auto-shutoff eliminates overnight risk
- Simple push-button — no training needed
- Resident amenity restored
- Insurance-friendly solution
Reduce Fire Risk. No Overnight Charging.
Lithium-ion battery incidents during uncontrolled charging have increased significantly, with the U.S. Consumer Product Safety Commission (CPSC) reporting a sharp rise in e-bike and e-scooter fire incidents since 2020. The Smart Socket helps reduce this risk — the socket turns off after 4 hours, every time, no exceptions.
Plug In. Mount. Ready.
The Smart Socket connects to standard grid power. Mount it on the wall with standard fixings. No electrician required. No network setup, no app configuration, no cloud account. Out of the box and onto the wall in under 30 minutes.
Standard Grid Power
110–120VAC or 220–240VAC. No dedicated circuits or special wiring required.
Wall Mount
Standard fixings included. Indoor use. No construction permits needed.
Ready in 30 Minutes
From unboxing to first charge. No configuration, no setup, no Wi-Fi pairing.
Combine Modules to Fit Any Bike Room
Each module has 3 independently controlled sockets. Snap modules side by side to match your bike room size.
1
module
3 sockets
2
modules
6 sockets
3
modules
9 sockets
4
modules
12 sockets
Not every bike needs a socket. Typical ratio: 1 socket per 2–3 parking spots covers peak demand, since not all residents charge daily and sessions are time-limited.
Where Does the Smart Socket Go?
Apartment Bike Rooms
Replace disconnected wall outlets with controlled, timed charging. Residents charge safely. Property managers stop worrying.
Corporate & Campus
Offer e-bike charging as an employee or student benefit. Mount a row of modules in the parking area. No IT involvement needed.
Transit Hubs
Commuters press the button, catch the train, pick up a charged bike. Park-and-ride made simple.
Alongside Bikeep Stations
Add Smart Socket modules next to existing Bikeep docks for a complete park-and-charge setup.
Specifications
Simple by design. No subscriptions, no connectivity, no ongoing costs.
Sockets per Module
3 independently controlled outlets
Activation
Individual push-button per socket
Auto-Shutoff
4h default (adjustable 1h / 2h / 4h / 8h)
Status Indicator
LED per socket (green = charging)
Input Power
110–120VAC (Type B) / 220–240VAC (Schuko)
Installation
Wall mount, standard fixings, no electrician
Enclosure
Powder-coated sheet metal
Operating Temp
-10°C to +40°C (indoor use)
Connectivity
None — no app, no WiFi, no SIM
Request a Quote
Tell us about your space and we'll help you choose the right setup. Response within 24 hours.